Open, modular egress and ingress monitoring solution

Vehicle-Based Leakage Detection Module DRV4

Vehicle-Based Leakage Detection Module
(DRV4)

The DRV4 module is a vehicle-based solution, requiring no technician interface for leakage monitoring within the cable operator network.

It is fully agile from 118-140 MHz (mid-band) and 600-860 MHz (LTE-band) allowing operators the flexibility in frequency selection.

When connected to the Mobile Control Module ARD4, it will upload detected events for further reporting and analysis through CPAT WEB.

Part of solution
Specifications
ELECTRICAL Details
Detector type Dual-band digital receiver / demodulator
Frequency range Agile 118 to 140 MHz
(mid-band)
Agile 600 to 860 MHz
(LTE-band)
Tuning resolution 100 Hz
Level range 2 to 4,000 μV/m @ 3 meters (mid-band)
5 to 4,000 μV/m @ 3 meters (LTE-band)
Level accuracy ±1.5 dB mid-band
±2.5 dB LTE-band
System tag AM [10 to 110 Hz]
DSB-SC modulation 3,500 to 7,000 Hz
Video NTSC (mid-band only)
Measurement units μV/m and dBμV/m
Power Via the ARD4 port (+ 5 VDC 0.8 A)
Communication port ARD4 port (proprietary) and USB serial port
Storage temperature -20˚ to +40˚ C / -4˚ to +104˚ F
Operating temperature 0˚ to +60˚ C / -32˚ to +140˚ F
Maximum relative humidity 80% for temperatures up to 31˚ C (88˚ F) decreasing linearly to 50% relative humidity at 40˚ C (104˚ F)
PHYSICAL Details
Dimensions [H x W x D] 3.3 cm x 11.2 cm x 22.3 cm / 1.3” x 4.4” x 8.8”
Weight 770 g / 27 oz

* Specifications subject to change without prior notice.

 

ORDERING INFO P/N
DRV4 - Vehicle-based digital leakage receiver 150-00035-100
RELATED ITEMS P/N
ARD4 - Autonomous recording device 150-00020-100
DSG1 - Head-end digital signal generator 150-00030-100
Faq
Why is the DIAG LED on the ARD4 flashing red?

The device is not properly configured in CPAT WEB or there is a communication problem caused by faulty USB cable or USB ports.  


diagram

diagram