DETECTING THE INVISIBLE, FINDING THE IMPOSSIBLE with our Leakage and Ingress localizing solutions

Portable Digital Signal Generator DSG1 LITE

Portable Digital Signal Generator

The DSG1 Lite portable dual-band digital signal generator inserts a high-level signal in order to perform a “pressure test” at the customer’s access point, from tap to CPE.

Part of solution
Modulator type Dual-band digital signal modulator
Output type Single “F” 75 Ω female connector
Frequency output 1 of 2 Fixed at 126 MHz (mid-band)
Frequency output 2 of 2 Fixed at 612 MHz (LTE-band)
Frequency stability ±5 KHz
Modulated signal 32 Hz AM tag
Output level from each RF output High: 50±2 dBmV at 126 MHz / 50±2 dBmV at 612 MHz
Low: 30±2 dBmV at 126 MHz / 30±2 dBmV at 612 MHz
Transmission status display Through an illuminated power button
Power adapter +12 VDC 1.2 A max
Battery Pack of 2 rechargeable 7.2 VDC lithium-ion batteries of 2000 mAh ~0.3 A
AC battery charger Input: 100-240 V ~50-60Hz 0.7 A
Output: +12 VDC 1.66 A
Transient overvoltage II
Rated pollution degree 2
Main supply voltage fluctuations Up to ±10% of the nominal voltage
Operation time 10 hrs. continuous on battery power
Operating temperature* -20°C to +40°C (-4°F to +104°C)
Charging temperature* 0°C to 45°C (32°F to 110°C)
Battery charge time 2.25 hrs. for full charge
Storage temperature -20°C to +45°C (-4°F to +113°C)
Maximum relative humidity 80% for temperatures up to 31°C (88°F) decreasing linearly to 50% relative humidity at 40°C (104°F)
Dimensions 4 cm x 12 cm x 13 cm / 1.5” x 4.7” x 5.1” [H x W x D]
Weight 500 g / 17 oz
Recommended use Indoor use or outdoor use without exposure to direct sunshine or a wet location

* Specifications subject to change without prior notice


DRV3 Lite, DSG1 Lite receiver and signal generator 150-00032-200
AC/DC adapter 110-00005-001
DSG1 Lite user manual 110-00010-001
Soft carrying case 113-00007-001